/ RESEARCH 004
STEPTRACEDid the web actually move?
A passive fiber-cleaning cassette study for assembly benches and cabling teams. The idea is to follow the web itself before exposing a fresh wiping area.
Research study · Physical prototype pending
Try the movement examples ↘
DESIGN STUDY · v0.1Drag to orbit, or use the buttons. No automatic motion. Geometry illustrates an idea; it is not a validated assembly.
01 / DESIGN LOGIC
A short pull can be counted twice.
Advance and reverse the virtual web one step at a time. The example compares ideal net travel with a counter that only adds forward movements. It does not simulate friction or validate a mechanical latch.
Signed local web movements, in millimetres. Positive advances; negative reverses. These are chosen inputs, not measurements.
- +5
- -5
- +5
- -5
- +5
- Net travel
- 0 mm
- Forward-only total
- 0 mm
8 mm travel criterion not reached.
The result is recalculated after every step. A real latch must also re-block after reversal. An indicator never confirms a clean fiber endface.
How much tolerance remains?
9.377 mm
Calculated lower bound at the window
Exceeds the assumed 8 mm requirement.
Show the assumptions
20 ± 0.2 mm effective diameter; 1.5° angle error; at most 5% overread; 0.25 mm unseen slack. Required separation: 7.2 + 0.8 = 8 mm.
π × 19.8 × (360/n − 1.5) ÷ 360 ÷ 1.05 − 0.25These bounds are unmeasured. A spinning follower on a stationary web invalidates the model. Six divisions is a bench-test candidate, not a validated setting.

01 / A compact tool
Proposed 116 × 62 × 32 mm housing, excluding the thumb control. All dimensions remain design assumptions.

02 / A deliberate input
The blue thumb control marks the feed action. Its movement alone must not be treated as proof that the web advanced.

03 / The cleaning window
The open-shutter appearance exposes a transverse wipe path. Guide geometry and connector clearance need physical checks.

04 / Closed between uses
A shallow seam separates the lid and body. Sealing, dust ingress and return spring action have not been tested.

05 / Access for service
The lid lifts to show the proposed layout. The display omits the unresolved transmission and interlock mechanism.

06 / Follow the used web
The blue follower is placed downstream of the wipe surface. This cutaway illustrates a route; nip force, wrap angle and slip still require a bench trial.
Where could demand come from?
A real category, an unproven advantage
A dated public order identifies an existing OPTIPOP cassette. Transceiver shipments provide a separate, adjacent demand signal. Neither measures the addressable market for STEPTRACE. In the next 30–90 days, the useful evidence would be paid cassette purchases, documented feed-related rework and willingness to trial a different tool.
Read the source evidence ↘A replacement window is not an open market
Over 3–6 months, the March 2027 end-of-sale date for selected NTT-AT models is a reason to track replacement decisions. The manufacturer already lists alternatives, which may absorb demand completely. Our connector compatibility, false-indication rate and cost benefit are unknown. This is a low-confidence research hypothesis, not a breakout forecast.
Before a physical pilot
- Materials and assembly
- Start with a printed housing and shutter, supply and take-up reels, an independent elastomer-rim follower, steel shafts, springs and a paper surrogate. Later optical trials need specified low-shedding cleaning media, controlled packaging and clean/used separation. Paper and ink stay away from optical surfaces.
- Dimensions and parts
- Housing target 116 × 62 × 32 mm; 24 mm test web; 18 mm transverse wiping stroke. A 20 mm follower and six divisions are provisional. Shaft fits, tension, roll capacity, transmission and return latch are unresolved. No complete supplier-confirmed BOM or production cost is available.
- Test sequence
- First measure actual paper travel through full strokes, half strokes, stalls and reversal, including near-empty rolls. Any false release sends the mechanism back for redesign. Only then compare cleaning results using independent endface inspection on de-energized scrap connectors. No physical tests have been completed.
- Market and product review
- Proposed scope: a dry, unpowered professional tool. Material safety, applicable product rules, labeling and patent claims need review for each destination. The available evidence does not establish sufficient scale, defensibility or readiness for sale.
Buyer questions
Does the indicator mean the fiber is clean?
No. It would indicate relative web movement only. Endface condition requires an independent inspection after cleaning.
Which connectors are supported?
None are validated yet. The initial study is limited to disconnected, unpinned plugs. Pinned plugs, recessed ports and live optical paths are outside this study.
Can I buy or order a sample?
A physical prototype, supply quote and market-access review are pending. Contact CNSURPR to discuss a trial requirement; this page makes no supply or delivery commitment.
Why not use an existing cassette?
Existing cassettes may be the better choice. STEPTRACE would need to demonstrate fewer false feed indications or lower rework cost under the same cleaning protocol to justify a premium.
Sources and their limits
Research opened 3 November 2026. Reviews remain scheduled for 3 December, 2 January and 1 February. An article publication does not reset the forecast dates.
A US delivery order names US Conec 6338 OPTIPOP and records US$773.20 obligated. Quantity and unit price are not established by this record. Checked 3 November.
USAspending · N0002426FG394 · 2026-07-07 ↗An existing refillable product family with different connector applications. This supports the category and also establishes a strong alternative. Catalog publication date not shown; checked 4 November 2026.
US Conec · Cleaning Solutions catalog ↗FOA specifies inspection after cleaning, with repeat cleaning and inspection as needed. A feed indicator cannot establish endface cleanliness. Checked 4 November 2026.
FOA-8 · 2025-01-13 ↗Supplier data shows selected 800G and 400ZR/ZR+ transceiver unit shipments grew by up to 3× year on year in Q2 2026. This is adjacent equipment demand, not cleaner sales or search volume. Checked 4 November.
LightCounting · September 2026 update ↗The notice schedules listed CLETOP MT-RJ and NEOCLEAN-EZ models for end of sale on 31 March 2027, or earlier if stock runs out. It lists alternatives. Its prose and table differ on MT-RJ/MPO wording; confirm the exact part with the manufacturer. It does not establish STEPTRACE compatibility. Checked 4 November.
NTT-AT · February 2026 discontinuation notice ↗The patent describes a removable cleaning cassette and interchangeable guide plates. Replaceability alone is not our novelty claim. This review is not a freedom-to-operate assessment. Checked 4 November 2026.
US7216393B2 · published 2007-05-15 ↗