SPLITLINECan this gang sheet be split by hand?
Check whether fixed DTF transfer graphics can be separated by straight passes. Try a layout and inspect a pair of workmat pointers in 3D.
Digital planner · Pointers await a workshop trial
Check a layout ↓
DESIGN STUDY · v0.1Drag to orbit, or use the buttons. No automatic motion. Geometry illustrates an idea; it is not a validated assembly.
Find a clear path through each piece
The four-design example takes three passes. The five-design interlock has no clear first pass at a 5 mm gap. Enter your own measured rectangles below. All calculations run in the browser. Coordinates always refer to the original sheet.
Import an existing SVG sheet
Unzip your export and choose one sheet. The supported centimetre-based SVG has 2–32 separately placed PNGs, one complete design per image. Flattened sheets, transformed layers and cut marks require manual entry. Files are read on this device.
Download the tested example (4 mm gaps)- A / B / C / D · Y = 55.5 mm
- A / B · X = 87.5 mm
- C / D · X = 147.5 mm
What is the time budget for hand separation?
One US finishing quote
Sumo Transfers lists a builder pre-cut option at US$0.35 per piece. For 20 pieces that is US$7. At an assumed loaded labour rate of US$30/hour, 14 minutes consumes the full US$7. Time coordinate entry, cutting, sorting and rework together. Freight, tools and waste can change the result.
Which buyers might care?
Among 108 in-plant managers surveyed in December 2024 and January 2025, 4% reported DTF printers and 10% planned to add them within two years. The survey measures equipment intentions. Supplier interviews published in October 2026 describe cooling early growth. Demand for this accessory and the share of shops that still hand-cut remain unknown.
Two pointers for one split
Each pointer has a proposed 48 × 24 mm footprint. Place them on the mat outside the inked surface. Remove them before using the shop’s cutter. The matched marks convey the chosen line to the next operator.
View design poster ↗
Opposite edges
A and B indicate the same gap from opposite sides of the workmat.

Blunt sight tip
The light centre mark ends before the steel nose. Compare visual alignment against tape marks on a real sheet.

Grip from above
Three raised ribs provide a proposed grip surface. Friction and handling with gloves still need testing.

Two-layer body
Proposed 2 mm steel ballast under a polymer cap. Both parts can be cut or printed for first samples.

Cap and ballast
The split view exposes the proposed bond line. Adhesive and joint durability await trials.

Underside contact
Two foot strips per pointer touch the workmat. Test slip and adhesive staining before specifying material.
What would change the forecast?
In the next 30–90 days, compare anonymised jobs from short-run shops with their existing marking method and their supplier’s pre-cut price. Over 3–6 months, check repeat use, labour per usable piece and reprints. If marking by eye performs as well or measurement consumes the finishing budget, retire the physical accessory.
What does a split separate?
It separates groups of rectangular artwork bounds on the current piece. The sequence stops when each group contains one design. Final contour trimming, outer margins, bleed and machine registration require a separate check.
Can I use an existing film layout?
Yes, if you can supply accurate bounding rectangles. Enter the clear gap your process requires and keep the original top-left reference for all coordinates. You can enter measurements or import supported SVG sheets containing separate image placements.
Can I order the pointers?
They are an appearance concept for adult print workshops. A shop trial, supplier quote and destination-specific checks are pending. A marker and two pieces of tape are a low-cost comparison.
Sources checked 11–12 November 2026
On 12 November we ran three original test graphics through this editor. Its SVG retained three positions on a 570 × 55 mm sheet. The archive filename rounded the length to 6 cm. The importer reads the sheet dimensions inside the SVG.
The Pirate Way · Gang Sheet Builder ↗US service menu checked 11 November 2026. Its sheet builder lists a per-piece pre-cut option. A separate flat-fee listing has different terms to confirm.
Sumo Transfers ↗2025 equipment survey, methodology and Figure 19. The sample covers in-house print operations and includes education and government.
PRINTING United Alliance / In-plant Impressions ↗24 October 2026. The publication’s own supplier interviews describe a maturing sector and a shift toward dependable production.
Images · State of the DTF market ↗A free sheet optimiser produces through-cut sequences for new panel layouts. It is a practical comparison when positions can change.
Fabivo ↗The manufacturer offers a dedicated DTF cutting workflow. Automated equipment is a further option for production shops.
Summa ↗