CNSURPR↗
← Research journal

DOTPROOFWill the label print as approved?

Compare an approved QR matrix with a final PNG before printing. The browser tool checks module pitch, pixel changes and the clear margin. The proposed desk keeps two paper samples and their job card together.

Digital tool tested · Sample desk awaiting prototype

Open the QR checker ↗
DOTPROOF desk with two QR samples, blue clips and a job card
DESIGN STUDY · v0.1

Drag to orbit, or use the buttons. No automatic motion. Geometry illustrates an idea; it is not a validated assembly.

Four files decoded. Three had artwork changes.

A system image decoder read the same sample URL from four digital PNGs. The local check distinguished the matching crop, one black pixel in the margin, one gray pixel in the symbol and a missing pixel column. All twelve browser checks passed. Physical print trials: zero.

Download five sample PNGs ↓ · Save the offline checker ↓

Reference and output, side by side

View the design poster ↗

Who would use it?

Prepress teams

Bemis documents an established proofing workflow through its supplier Esko. Tesco’s 2026 announcement gives a separate retail adoption signal. Over 30–90 days we will look for named short-run converters changing label artwork and publishing evidence of rework or procurement.

What would justify a desk?

Over 3–6 months, compare an ordinary clipboard with the desk across repeat jobs. Count mismatched samples and time spent tracing them. Existing inspection software and generic image comparison are strong substitutes. Market size, willingness to pay and workbench savings remain open.

Before the first print trial

Parts and cost
Proposed matte PETG deck, two replaceable retainers, fasteners and a removable paper job card. Supplier quotes, clip force, material suitability, destination rules and unit cost require confirmation.
Print comparison
Record head pitch, print speed, darkness, media and driver scaling for every sample. Compare the crop, measured module width, scan results and independently graded print. No calibrated print-quality grade is available for DOTPROOF.

Buyer questions

What should I try first?

Open the checker and choose “Add a margin speck”. It reports one changed margin pixel. Download the sample pack to compare the reference with independently prepared PNGs.

Does the PNG fit a 20 mm print area?

For a 33-module symbol plus four modules per edge, four printer dots per module at 8 dots/mm require 20.50 mm. Five dots per module at 12 dots/mm require 17.08 mm. A separately encoded 29-module example fits in 18.50 mm on the 8-dot head. Preserve required production data when choosing an encoding.

What does a pixel match establish?

It establishes agreement with the selected black-and-white matrix and the specified crop. Inspect the approved payload and the finished print separately. Use calibrated equipment for a print-quality grade.

Can I order the desk?

The desk is a design study. Sample production, sourcing and delivery terms await validation.

Sources reviewed 5–6 November 2026

  1. Esko reports that Bemis used integrated proof checks from early 2016, including barcode comparison with approved artwork. This historical supplier case supports the workflow. Its purchase price and present usage are unknown.

    Esko · Bemis Graphics ↗
  2. Tesco announced the start of a QR transition with Cranswick covering 13 private-label sausage lines in the UK. The count describes product lines.

    Tesco · 20 April 2026 ↗
  3. Our example uses the December 2025 retail QR profile: four modules of quiet zone per side and a module width of 0.396–0.990 mm. Use the applicable specification for each real job.

    GS1 · Retail POS guideline, Table 6-4 ↗
  4. The manufacturer lists configurations at 8 and 12 dots/mm. The study uses those nominal densities for layout calculations.

    Zebra · ZD421 ↗
  5. Published Barcode Check fees including tax: AUD 49.50 for members and AUD 64.90 at full rate. These apply to that service.

    GS1 Australia · fee schedule effective 1 July 2026 ↗
  6. Document inspection tools already detect and check codes. A small local tool must demonstrate additional value on a real job.

    GlobalVision · Verify ↗
  7. An existing free tool estimates symbol size from the data. This is an alternative for layout planning.

    GS1 · Retail 2D barcode size estimator ↗

Where does your proofing process lose time?